Watts LFM116 THD E 20-200 PI 3 - Part of the LFM116 Series ZA100F-4NH Specifications ArmorTek Technology No Backflow

Specifications ArmorTek Technology No Backflow Preventer Type Double Check Valve Assembly Body Finish Cast Bronze Body Material Cast Bronze Body Pattern Inline Brand Watts Bypass No Bypass Size Does Not Apply To Product Cap And Tether No Disc Material Rubber EAN 098268592078 Elbow Fitting No Hazard Protection Level Non Health Hazard Hot And Harsh Water No Hydrant Connection No Inlet Connection Size 1 IN Inlet Connection Type Female Threaded Inlet Shutoff Valve Type Quarter Turn Ball Valve Inlet Thread Type NPT Lead Free NO Maximum Temperature-Fahrenheit 180 Maximum Working Pressure-BAR 12

This 1 1/4 inch 2-piece lead free copper silicon alloy standard port ball valve with actuator mounting pads is used in commercial and industrial applications for a wide range of liquids and gases

Specifications Body Material Ductile Iron Brand Watts Buy American Act Compliant NO Class Rating 150 Control Type Lever Handle CV Rating 600 GPM Disc Material Ductile Iron EAN 098268606492 Inlet Connection Size 4 IN Inlet Connection Type Wafer Inlet Thread Type Does Not Apply To Product Lead Free Yes Maximum Operating Temperature-Fahrenheit 248 Maximum Working Pressure-PSI 200 Minimum Temperature-Fahrenheit 5 Operating Torque-Dry 644 in-lbs Operating Torque-Wet 390 in-lbs Outlet Connection Size 4 IN Outlet Connection Type Wafer Outlet Thread Type Does Not Apply To Product Part Number 0525826 Seat Material EPDM Series BF-04 Silicone Free No Stem Shaft Material 416 Stainless Steel Valve Style Wafer Specification Sheet - BF-03-M2

The suspended solids settle out of the slowed flow and are captured by the Dandy Sack prior to entering the inlet

UPC - 098268119121

Watts LFM116 THD E 20-200 PI 3 - Part of the LFM116 Series ZA100F-4NH Specifications ArmorTek Technology No BackflowThis 3 inch ACV is armed with ArmorTek, a patented 3 part advanced epoxy coating system designed to limit both microbial induced (MIC) and exposed metal substrate corrosion. This pressure relief control valve is designed to permit flow when upstream pressure is above the adjustable setpoint of the control pilot, and throttle toward closed when upstream pressure falls below the adjustable setpoint. When the valve is installed off the main line on the